• ROOKO瑞柯微双电四探针粉末电阻率测试仪FT-8200

    详细信息

     品牌:ROOKO瑞柯微  型号:FT-8200  加工定制:是  
     类型:其他  测量范围:0.1 MΩ 电源:220  
     测试电压:5 V 精度:0.0001  重复误差:1%  
     环境温度:25  相对湿度:1  校准周期:12个月  
     重量:55 kg 尺寸:1   
    一、功能概述:Functional overview
    FT-8200双电四探针粉末电阻率测试仪 

    大量程方阻测量范围、测量到-5次方或-6次方,采用高精度集成电路模块;智能一体化结构设计,整体大方, USB,232通讯接口,高精恒直流恒流源 ,提供四探点针法测量模式, 全程采用PC软件操作,粉体压缩前及压缩后压力增减过程中粉体因自身特性内聚力反弹形变或恢复过程变化曲线图谱;自动测试过程数据曲线及图谱分析,实时分析压强/压力与电阻,电阻率,电导率的变化关系,及报表生成,存储,打印等;
    FT-8200双电四探针粉末电阻率测试仪 
    A high precision integrated circuit module is used for the measurement range wide range of sheet resistor. the allest measure to the minus 5 or the negative 6 power.Intelligent integration structure design the overall generous USB 232 communication intece high precision constant DC constant current source and provide four point probe method and four-terminal method two measurement modes coexist fully use the PC software operation the process of autotic test data curve and spectrum ysis real-time ysis of pressure/pressure and resistance resistivity and the changes of conductivity and report generation storage printing etc
    FT-8200双电四探针粉末电阻率测试仪 
    二、满足标准:Meet Standard

    1)四探针测试仪满足GB/T1551、GB/T1552-1995,ASTMF84美国A.S.T.M标准。

    The four-probe tester meets GB/T 1551 GB/t1552-1995 ASTM F84 U.S. A.S.T.M standard.

    2)四探针法粉末测试平台依据GBT30835-2014《锂离子电池用炭复合酸铁锂正极材料》中关于粉末电导率的测定方法中用于仲裁方法的四探针法要求制作.

    Four point probe method test platform based on GBT powder 30835-2014 “The lithium ion battery with carbon compound lithium iron phosphate cathode terial >method for determination of the conductivity of powder in four point probe method for arbitration method in the request.
    FT-8200双电四探针粉末电阻率测试仪 
    三、适用范围:Scope of application

    广泛用于锂离子电池用炭复合酸铁锂正极材料电阻率的测量;也应用于需要采用四探针法测量的导体或半导体粉末材料的分析与检测;用于石墨类粉状材料电阻率的测量;广泛应用于国内外企业品质检测;研发部门,大中专院校;科研院所;及质量检测机构.

    Widely used in the measurement of resistivity of lithium anode terials used in lithium ion batteries.It also applies to the ysis and detection of a conductor or semiconductor powder terial that needs to be measured by four probes.Measurement of resistivity of graphite powder terials;It is widely used in domestic and foreign enterprise quality testing.The research and development department the college of jor and secondary schools;Research institutes and Quality monitoring organization.

    四、技术参数资料Technical Parameters

    规型号/ Specification model

    FT-8200A

    FT-8200B

    FT-8200C

    1.方块电阻范围sheet resistance range

    10-5~2×105Ω/□

    10-6~2×105Ω/□

    10-4~2×104Ω/□

    2.电阻率范围

    resistivity range

    10-6~2×106Ω-cm

    10-7~2×107Ω-cm

    10-5~2×105Ω-cm

    电导率范围Conductivity range

    5×10-6~106ms/cm

    5×10-7~107ms/cm

    5×10-5~105ms/cm

    3.测试电流范围

    test current range

    0.1μA ,1μA,10μA,100>A,1mA,10mA,100 mA

    10μA,100>A,1mA,10mA,100 mA、1000mA

    0.1μA ,1μA,10μA,100>A,1mA,10mA,100 mA

    4.电流精度current

    ±0.1% accuracy

    软件界面

    电阻、电阻率、方阻、温度、单位切换、温度系数、电流、电压、探针形状、探针间距、厚度 、电导率、图谱显示,压力设定,压强,压强,报表导出,波形刷新,时间设定,启动、停止、运行

    resistance resistivity sheet resistance temperature unit conversion temperature coefficient current voltage probe shape probe spacing thickness conductivity. Graph shows pressure setting minimum pressure ximum pressure report export waveform refresh time setting start stop run

    6.测试方式Test method

    双电组合测量ordinary single electrical measurement

    7.模具选购mold:

    模具mold:内径inner diameter 10mm; 20mm;高height 25mm ;(选购choose to buy)

    8.压力选购pressure:

    压力Pressure:0-1000kg; 0-200kg Choose to buy

    9. 模腔行程:

    Die cavity stroke:

    0-20mm(样品压实厚度建议在4mm内)

    (Sample compaction thickness is recommended in 4mm)

    10. 样品高度Sampleheight

    样品高度范围:0.000-10.000mm,测量分辨率0.001mm,

    可测样品压缩厚度0.1mm

    Sampleheightrange:0.000-10.000mmmeasurementresolution0.001mmtheminimummeasurablesamplecompressionthickness0.1mm

    11. 恒压时间: time:

    0-99.9s

    12.温湿度范围Temperature and humidity

    常温-50度;湿度:20%-98%/

    Room temperature -50 degrees humidity:20%-98%

    13. 标配标准件Standard Parts

    a.标准校准电阻1个;b.标准高度校准件1个

    a.standardcalibrationresistance1;b.standardheightcalibration1

    14. 测试方Testmode

    a.四点探针法 Four - point probe method

    b.自动测量Autotic measurement

    15. 加压方Pressurized

    自动Autotic

    16. 脱模方式Stripping

    自动Autotic

    17.电极材质Electrode

    铜针Copper terial

    18.吸尘系统

    Vacuumingsystem

    外置吸尘处理External dust treatment

    19.整机不确定性误差: errors

    3%; 重复性误差2%以内(平均性误差,人为因数外)average error except hun factor

    20.工作电源: Power supply

    输入: AC 220V±10% 50Hz :60W

    21. 标配外选购

    Others buy

    a.电脑和打印机依据客户要求配置; b.计量1份

    c.水分仪 d.密度仪

    a. computers and printers based on customer configuration requirements.

    b. Measurement certificate 1. c. moisture meter d. true density meter
     


     
  • 留言

    *详细需求:
    *手  机:
    联 系 人:
    电    话:
    E-mail:
    公  司:
    谷瀑服务条款》《隐私政策
宁波瑞柯微智能科技有限公司 电话:0574-27975197 手机:18100127132 地址: 宁波市江北区慈城镇张嘉路91弄9号三楼
内容声明:谷瀑为第三方平台及互联网信息服务提供者,谷瀑(含网站、客户端等)所展示的商品/服务的标题、价格、详情等信息内容系由店铺经营者发布,其真实性、准确性和合法性均由店铺经营者负责。谷瀑提醒您购买商品/服务前注意谨慎核实,如您对商品/服务的标题、价格、详情等任何信息有任何疑问的,请在购买前通过谷瀑与店铺经营者沟通确认;谷瀑上存在海量店铺,如您发现店铺内有任何违法/侵权信息,请在谷瀑首页底栏投诉通道进行投诉。